 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD - 94343 RADIATION HARDENED POWER MOSFET THRU-HOLE (TO-257AA) Product Summary Part Number Radiation Level RDS(on) ID IRHY597130CM 100K Rads (Si) 0.215 -12.5A IRHY593130CM 300K Rads (Si) 0.215 -12.5A IRHY597130CM 100V, P-CHANNEL 4# TECHNOLOGY c International Rectifier's R5TM technology provides high performance power MOSFETs for space applications. These devices have been characterized for Single Event Effects (SEE) with useful performance up to an LET of 80 (MeV/(mg/cm2)). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters. T0-257AA Features: n n n n n n n n n Single Event Effect (SEE) Hardened Ultra Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Light Weight Absolute Maximum Ratings Parameter ID @ VGS = -12V, TC = 25C ID @ VGS = -12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Lead Temperature Weight -12.5 -8.0 -50 75 0.6 20 94 -12.5 7.5 -4.3 -55 to 150 Pre-Irradiation Units A W W/C V mJ A mJ V/ns o C 300 (0.063in/1.6mm from case for 10s ) 4.3 ( Typical ) g For footnotes refer to the last page www.irf.com 1 11/19/01 IRHY597130CM Pre-Irradiation Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified) Parameter Min Typ Max Units -- -0.12 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6.8 -- -- 0.215 -4.0 -- -10 -25 -100 100 40 16 11 25 55 30 100 -- V V/C V S( ) A Test Conditions VGS = 0V, ID = -1.0mA Reference to 25C, ID = -1.0mA VGS = -12V, ID = -8.0A VDS = VGS, ID = -1.0mA VDS > -15V, IDS = -8.0A VDS= -80V ,VGS=0V VDS = -80V, VGS = 0V, TJ =125C VGS = -20V VGS = 20V VGS =-12V, ID = -12.5A VDS = -50V VDD = -50V, ID = -12.5A, VGS =-12V, RG = 7.5, BVDSS Drain-to-Source Breakdown Voltage -100 BV DSS/T J Temperature Coefficient of Breakdown -- Voltage RDS(on) Static Drain-to-Source On-State -- Resistance VGS(th) Gate Threshold Voltage -2.0 gfs Forward Transconductance 6.3 IDSS Zero Gate Voltage Drain Current -- -- IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance -- -- -- -- -- -- -- -- -- -- nA nC ns nH Ciss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance -- -- -- 1350 330 20 -- -- -- pF Measured from drain lead (6mm/ 0.25in. from package) to source lead (6mm/0.25in. from package) VGS = 0V, VDS = -25V f = 1.0MHz Source-Drain Diode Ratings and Characteristics Parameter IS ISM VSD t rr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min Typ Max Units -- -- -- -- -- -- -- -- -- -- -12.5 -50 -5.0 150 620 Test Conditions A V ns nC Tj = 25C, IS = -12.5A, VGS = 0V Tj = 25C, IF =-12.5A, di/dt -100A/s VDD -25V Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter RthJC RthJA Junction-to-Case Junction-to-Ambient Min Typ Max Units -- -- -- -- 1.67 80 C/W Test Conditions Typical Socket Mount Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page 2 www.irf.com Radiation Characteristics Pre-Irradiation IRHY597130CM International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation Parameter BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Source On-State Resistance (TO-257AA) Diode Forward Voltage 100K Rads(Si)1 Min Max -100 -2.0 -- -- -- -- -- -- -- -4.0 -100 100 -10 0.205 0.215 -5.0 300KRads(Si)2 Min Max -200 -2.0 -- -- -- -- -- -- -- -5.0 -100 100 -10 0.205 0.215 -5.0 Units V nA A V Test Conditions VGS = 0V, ID = -1.0mA VGS = VDS, ID = -1.0mA VGS =-20V VGS = 20 V VDS=-80V, VGS =0V VGS = -12V, ID =-8.0A VGS = -12V, ID =-8.0A VGS = 0V, IS = -12.5A 1. Part number IRHY597130CM 2. Part number IRHY593130CM International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2. Table 2. Single Event Effect Safe Operating Area Ion Br I Au LET (MeV/(mg/cm2)) 37.9 59.7 82.3 Energy (MeV) 252.6 314 350 VDS (V) Range (m) @VGS=0V @VGS=5V @VGS=10V @VGS=15V @VGS=17.5V @VGS=20V 33.1 -100 -100 -100 -100 -100 -100 30.5 -100 -100 -100 -100 -75 -25 28.4 -100 -100 -100 -30 -- -- -120 -100 -80 VDS -60 -40 -20 0 0 5 10 VGS 15 20 25 Br I Au Fig a. Single Event Effect, Safe Operating Area For footnotes refer to the last page www.irf.com 3 IRHY597130CM Pre-Irradiation 100 10 -I D , Drain-to-Source Current (A) -I D , Drain-to-Source Current (A) VGS -15V -12V -10V -9.0V -8.0V -7.0V -6.0V BOTTOM -5.0V TOP 100 VGS -15V -12V -10V -9.0V -8.0V -7.0V -6.0V BOTTOM -5.0V TOP 10 -5.0V -5.0V 1 0.1 20s PULSE WIDTH T = 25 C J 1 10 100 1 0.1 20s PULSE WIDTH T = 150 C J 1 10 100 -VDS , Drain-to-Source Voltage (V) -VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 100 2.5 -I D , Drain-to-Source Current (A) TJ = 25 C R DS(on) , Drain-to-Source On Resistance (Normalized) ID = -12.5A 2.0 TJ = 150 C 10 1.5 1.0 0.5 1 5 6 7 8 15 V DS = -25V 20s PULSE WIDTH 9 10 11 0.0 -60 -40 -20 VGS = -12V 0 20 40 60 80 100 120 140 160 -VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature( C) Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature 4 www.irf.com Pre-Irradiation IRHY597130CM 2000 -VGS , Gate-to-Source Voltage (V) 1600 C, Capacitance (pF) Ciss 1200 VGS = Ciss = Crss = Coss = 0V, f = 1MHz Cgs + Cgd , Cds SHORTED Cgd Cds + Cgd 20 ID = -12.5A 16 VDS =-80V VDS =-50V VDS =-20V 12 C oss 800 8 400 4 C rss 0 1 10 100 0 0 10 FOR TEST CIRCUIT SEE FIGURE 13 20 30 40 -VDS , Drain-to-Source Voltage (V) Q G , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 100 100 OPERATION IN THIS AREA LIMITED BY RDS(on) -ISD , Reverse Drain Current (A) ID, Drain-to-Source Current (A) 10 TJ = 150 C TJ = 25 C 10 100s 1ms 1 Tc = 25C Tj = 150C Single Pulse 0.1 1 10 100 1000 VDS , Drain-toSource Voltage (V) 10ms 1 0.1 1.0 V GS = 0 V 2.0 3.0 4.0 5.0 6.0 -VSD ,Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area www.irf.com 5 IRHY597130CM Pre-Irradiation 14 V DS VGS RG RD 12 D.U.T. + -ID , Drain Current (A) 10 8 VGS Pulse Width 1 s Duty Factor 0.1 % 6 4 Fig 10a. Switching Time Test Circuit td(on) tr t d(off) tf 2 0 25 50 75 100 125 150 VGS 10% TC , Case Temperature ( C) 90% VDS Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10b. Switching Time Waveforms 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.05 0.1 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) 0.01 0.00001 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.1 0.0001 0.001 0.01 1 P DM t1 t2 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case 6 www.irf.com - V DD Pre-Irradiation IRHY597130CM EAS , Single Pulse Avalanche Energy (mJ) VDS L 200 RG D .U .T IA S + D R IV E R VD D V DD A 160 ID -5.6A -8.0A BOTTOM -12.5A TOP VGS -20V tp 0.0 1 120 15V 80 40 Fig 12a. Unclamped Inductive Test Circuit IAS 0 25 50 75 100 125 150 Starting TJ , Junction Temperature ( C) Fig 12c. Maximum Avalanche Energy Vs. Drain Current tp V(BR)DSS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. QG 50K -12V 12V .2F .3F -12 V QGS VG QGD VGS -3mA Charge IG ID Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit www.irf.com + D.U.T. - VDS 7 IRHY597130CM Pre-Irradiation Footnotes: Repetitive Rating; Pulse width limited by maximum junction temperature. VDD = -25V, starting TJ = 25C, L=1.2 mH Peak IL = -12.5A, VGS = -12V ISD -12.5A, di/dt -320A/s, VDD -100V, TJ 150C Pulse width 300 s; Duty Cycle 2% Total Dose Irradiation with VGS Bias. -12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Total Dose Irradiation with VDS Bias. -80 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A. Case Outline and Dimensions -- TO-257AA A 10.66 [.420] 10.42 [.410] 3X O 3.81 [.150] 3.56 [.140] 5.08 [.200] 4.83 [.190] 0.13 [.005] 1.14 [.045] 0.89 [.035] 13.63 [.537] 13.39 [.527] 16.89 [.665] 16.39 [.645] 10.92 [.430] 10.42 [.410] 1 2 3 B C 15.88 [.625] 12.70 [.500] 0.71 [.028] MAX. 2.54 [.100] 2X 3X O 0.88 [.035] 0.64 [.025] CA B 3.05 [.120] O 0.50 [.020] NOT ES: 1. 2. 3. 4. DIMENSIONING & T OLERANCING PER ANS I Y14.5M-1994. CONT ROLLING DIMENS ION: INCH. DIMENSIONS ARE S HOWN IN MILLIMET ERS [INCHES]. OUT LINE CONFORMS T O JEDEC OUT LINE T O-257AA. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 11/01 8 www.irf.com |
Price & Availability of IRHY597130CM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |